Which DMX adapters can I use?

The RGB Floods and RGB Strips from Light-O-Rama hook up to the CMB24D controller. This controller needs a 12VDC power supply in order to power the devices. Both the floods and strips will connect to the CMB controller. The power supply will also connect to the controller, and provide DC power to the attached devices….

Light-O-Rama has two different types of RGB Ribbons. Each of the ribbons are LED based, and can change to any color you wish. The similarities end there.  There are two types of ribbons. A smart ribbon and a dumb ribbon. It is very important that you understand the difference. The Light-O-Rama Cosmic Color Ribbon is…

If it’s a 1600 series Generation 1 or 2 (metal enclosure and no LED display inside)), disconnect the power, set the unit ID switches to 0-0, and reapply power.  The status light will blink very fast.  Wait a few seconds, remove power, change the Unit ID switches back to where they were and reapply power. …

Soon you’ll ask the same question that everyone else asks, “Can I mix controller types on the same network?” The answer depends on the types of controllers as well as the ages of the controllers.

These are some of the differences between controllers, as described by Dan Baldwin, the founder of Light-O-Rama. The LOR1602W (LOR) is a commercial grade controller with a UL508 (industrial) rating. It is the only controller in the Animated Christmas Market Place with safety certification. The CTB16PC-ReadyToGO (PC) is not safety certified (but is designed with…

Don’t know what type of controller you have? Here is a description of the 16 channel controllers.   1600 series Generation 1 or 2 – metal enclosure and no LED display inside. 1600 series Generation 3 –  metal enclosure with LED display inside. CTB-16PC series Generation 1 or 2  – Typically in a plastic enclosure,…